рефераты конспекты курсовые дипломные лекции шпоры

Раздел Механика
/
General

Реферат Курсовая Конспект

Выберите учебное заведение

General

General - раздел Механика, DISTANCE MEASURING EQUIPMENT - INTRODUCTION These Are The Components In The Flight Compartment That Have An Interface Wit...

These are the components in the flight compartment that have an interface with the DME system:

· FMC source select switch

· Left inboard and outboard display units

· Left and right EFIS control panels

· Right inboard and outboard display units

· Captain’s and first officer’s NAV control panel

· Captain’s and first officer’s audio control panel.

DME SYSTEM - COMPONENT LOCATION - ELECTRONIC EQUIPMENT COMPARTMENT AND ANTENNAS

Развернуть

Открыть в широком формате

– Конец работы –

Эта тема принадлежит разделу:

DISTANCE MEASURING EQUIPMENT - INTRODUCTION

Purpose... The distance measuring equipment DME system supplies slant range line of... DME SYSTEM COMPONENT LOCATION FLIGHT COMPARTMENT General...

Если Вам нужно дополнительный материал на эту тему, или Вы не нашли то, что искали, рекомендуем воспользоваться поиском по нашей базе работ: General

Что будем делать с полученным материалом:

Если этот материал оказался полезным ля Вас, Вы можете сохранить его на свою страничку в социальных сетях:

Все темы данного раздела:

Abbreviations and Acronyms
· AC - alternating current · ACP - audio control panel · ADF - automatic direction finder · alt - alternate · altn - alternate · app - approach

DME SYSTEM - GENERAL DESCRIPTION
General The DME system has two DME interrogators and two antennas. Description The interrogators get manual tune inputs and flight management computer system (FMCS) autot

DME Outputs
Each DME interrogator has two output buses. One output bus supplies data to the on-side flight control computer (FCC). DME 1 sends data to FCC A and DME 2 sends data to FCC B. the other Output bus

General
The navigation (NAV) control panels supply frequency inputs and test commands to these navigation radios: · DME · ILS · VOR. When you put a paired VOR or ILS fre

Operation
The NAV control panels have an active frequency display window and a standby frequency display window. The frequency that shows in the active frequency display window is the frequency that the navi

Operation
The CPU uses tune inputs to tune the frequency synthesizer. The CPU give a signal to the transmitter to send interrogation pulses. The transmit pulses go through a circulator then to the DME antenn

DME SYSTEM - SELF TEST
Self Test Push the test switch on the DME interrogator to start a DME selftest. Front Panel Displays The LED status indicators go through this sequence: · The LR

General
During a ground test or a self test, the display units show these indications: · The DME fail condition for two seconds · The DME NCD condition for the next two seconds ·