рефераты конспекты курсовые дипломные лекции шпоры

Реферат Курсовая Конспект

Heat transfer.

Heat transfer. - раздел Иностранные языки, АНГЛИЙСКИЙ ЯЗЫК The Total Heat Transfer Occurring Within A Furnace Can Be Broken Down Into Fo...

The total heat transfer occurring within a furnace can be broken down into four main areas:

– radiant heat transfer from the flame to the product;

– radiant heat transfer from the exhaust gases to the product;

– convective heat transfer from the exhaust gases to the product;

– radiant heat transfer from the furnace structure to the product.

Radiant heat transfer from the flame. It is the carbon particles in the fuel that are the source of radiation from the flame. There are fewer particles in an oxy-fuel flame due to the fact that, owing to the improved thermal efficiency, less fuel is used for a given heat input requirement compared with air-fuel. However, the total flame radiation is also a function of the temperature difference to the fourth power between the flame and the material being heated. Thus, as the adiabatic flame temperature of an oxy-fuel flame is around 2 700°C compared with 1 800°C for air-fuel, this more than compensates for the lower number of carbon particles, giving overall, higher total radiation from the flame. This accounts for the improvement in radiant heat transfer in oxy-fuel combustion.

Radiant heat transfer from the exhaust gases. Radiant heat transfer from the exhaust gases is a function of the molecular species within the exhaust gases plus the temperature and velocity of the exhaust gas stream. The exhaust gases present in air-fuel combustion are predominantly nitrogen with smaller quantities of CO2 and water vapour. The products of oxy-fuel combustion however, are CO2 and water vapour. These tri-atomic molecules have excellent radiation heat transfer properties, whereas nitrogen does not transfer its heat energy by radiation at all. Thus the atmosphere from oxy-fuel combustion consisting purely of hot CO2 and water vapour transfers heat much more effectively that the mostly nitrogen containing air-fuel atmosphere.

Convective heat transfer. Heat conduction within gases is quite poor. Thus, velocity and turbulence have a significant effect upon the extent of heat transfer by convection. For this reason convection contributes significantly to the overall heat transfer in an air-fuel fired furnace due to the large volumes of exhaust gas that travel through the furnace. This is not so however in the case of oxy-fuel as the exhaust gas volumes are reduced by over 75%, and the high efficiency of radiant heat transfer by water vapour and CO2 from the exhaust gas is by far the primary source of heat transfer.

Radiant heat transfer from the furnace sidewalls. Radiant heat transfer of a surface depends to a large extent upon the emissivity and absorptivity of the material surface. In oxy-fuel combustion efficient radiant heat transfer from both the exhaust gas and directly from the flame effectively transfers heat to the furnace sidewalls. Radiation heat transfer from the furnace sidewalls back into the furnace is then dependent to a large extent upon the emissivity and absorptivity of the surface. In addition, the relative positions of the radiating and receiving surfaces affect heat transfer rate. The quantitative measure of this ability is termed the 'arrangement or view factor’, which corresponds to the fraction of radiation that comes from the radiating surface to the receiving surface. Thus, the actual radiation heat transfer from the walls is the black body rate multiplied by the emissivity factor and the arrangement or view factor.

– Конец работы –

Эта тема принадлежит разделу:

АНГЛИЙСКИЙ ЯЗЫК

Федеральное агентство по образованию... Южно Уральский государственный университет... Кафедра английского языка...

Если Вам нужно дополнительный материал на эту тему, или Вы не нашли то, что искали, рекомендуем воспользоваться поиском по нашей базе работ: Heat transfer.

Что будем делать с полученным материалом:

Если этот материал оказался полезным ля Вас, Вы можете сохранить его на свою страничку в социальных сетях:

Все темы данного раздела:

My Speciality
I. Повторите и запомните следующие слова: 1) choose (chose, chosen), v   – выбирать 2) daily, adj

My Speciality
There are many faculties in the South Urals State University. But those students who have chosen the career in metallurgy study at the Metallurgical department. I’m a student of the Metallurgical D

Ferrous and Non-Ferrous Metals. Alloys
  I. Повторите, запомните следующие слова: 1) appearance, n – внешний вид 2) compose, v – составлять 3) dense, a – плотный 4) feature, n – особенно

Ferrous and Non-Ferrous Metals. Alloys
  It is known that metals are very important in our life. Metals have the greatest importance for industry. About two thirds of all elements found in the earth are metals. It is diffi

Iron and Iron Ores
I. Повторите и запомните следующие слова: 1) associate, v – соединять(ся) 2) as well as – также, а также 3) cheap, a – дешевый 4) cost, n – стоимость 5)

Iron and Iron Ores
Iron is the only metal that can be found in almost every part of the world. It’s the fourth element in abundance on the earth, being exceeded by oxygen, silicon and aluminum. It is the cheapest of

Grey Cast Iron
I. Повторите и запомните следующие слова: 1) distribution, n – распределение, распространение 2) flake, n – чешуйка, хлопья (мн.ч.) 3) include, v – включать 4) s

Grey Cast Iron
  Grey cast iron is one of the most valued of cast metals. It may be made by melting pig iron and scrap in the cheapest of melting processes, the cupola, and then cast into sand molds

Casting
I. Повторите и запомните следующие слова: 1) accurate, a – точный 2) allow, v – позволять, разрешать 3) cavity, n – полость, пустота 4) hot, a – горячий

Casting
Casting is the oldest method of forming metals. Basically it consists of melting and pouring liquid metal into a cavity of the desired size and shape and allowing the metal to solidify. There are n

Metals and Non–Metals
I. Повторите и запомните следующие слова и словосочетания: 1) alloying element – легирующий элемент 2) alkali metal – щелочной металл 3) base metal – основной металл

Metals and Non–Metals
Among the more obvious distinctions between different kinds of elements is that which divides metals and nonmetals. Metals are distinguished from nonmetals by their high conductivity for heat and e

Corrosion
  I. Повторите и запомните следующие слова: 1) damp air – влажный воздух 2) deposit, n – осадок, осаждать 3) destruction, n – разрушение 4) dilute,

Corrosion
It has long been known that metals can undergo changes in which they lose their characteristic properties; in most cases, the metal ceases to be an element, and becomes a compound. Iron exposed to

The Iron Blast Furnace
I. Повторите и запомните следующие слова: 1) carry up, v – поднимать 2) consume, v – потреблять 3) drop, v – опускать 4) float, v – плавать 5) flow, n –

The Iron Blast Furnace
  Pig iron is one of the most important materials produced in the metallurgical industry. It is generally produced from the iron ore by chemical reduction process of iron conducted in

Bessemer Converter
I. Повторите, запомните следующие слова: 1) affinity, n – сродство, родственность 2) capacity, n – емкость, мощность, производительность 3) interior, n – внутренность, вн

Bessemer Converter
  Molten pig iron, gaseous oxygen and steel scrap are the main constituents for making steel in the converter. Pig iron contains carbon, manganese, phosphorus, sulphur and silicon in

Open-Hearth Furnace
I. Повторите и запомните следующие слова: 1) damper, n – заглушка 2) capacity, n, v – емкость, производительность 3) checkerwork, n – насадка 4) combustion, n –

Open-Hearth Furnace
The phenomenal success of the Bessemer process attracted many other inventors to the study of new and improved methods of steelmaking. The only process which was destined to become a rival of the B

Electric Furnace
I. Повторите и запомните следующие слова: 1) accomplish, v – совершать, выполнять 2) advantage, n – преимущество, польза 3) arc, n – дуга 4) conductor, n – прово

Electric Furnace
  Numerous types of furnaces utilizing electric current as the source of heat have been developed by a large number of investigators, but relatively few types have survived as practic

Continuous Casting of Steel
I. Повторите и запомните следующие слова: 1) apply, v – применять, прикладывать 2) completely, adv – совершенно, полностью 3) conventional, adj – общепринятый, стандартны

Continuous Casting of Steel
Continuous casting as at present applied to the production of steel may be defined as a process in which liquid metal is poured into an open-ended mould, from the lower end of which a partially sol

Types of Mills
I. Повторите и запомните следующие слова: 1) accessories, n – принадлежности, арматура 2) billet, n – заготовка, сутунка 3) blooms, n – блюм, стальная болванка 4

Types of Mills
The three principal types of rolling mills used for the rolling of steel are referred to as "two-high", "three-high", and "four-high mills". As the names indicate, the

The Physics and Chemistry of Metallurgy
I. Повторите и запомните следующие слова: 1) fundamentals, n – основы 2) matter, n – материя, вещество, 3) correlation, n – соотношение 4. to reveal, v –

The physics and chemistry of metallurgy
  Metallurgy is a science dealing with the constitution, structure and properties of metals and alloys, and the processes by which they are obtained from ores and adapted for the use

Relation of Metallurgy to Physics and Chemistry
  I. Повторите и запомните следующие слова: 1) involve, v – включать в себя, подразумевать 2) outwardly, adv – внешне, снаружи 3) earthy, a – земляной, зерн

Relation of Metallurgy to Physics and Chemistry
In principle, steelmaking involves only a relatively, outwardly simple steps. Principal iron ores consist of combinations of iron with oxygen (iron oxides), mixed with varying percentages of useles

Protection of Steel from Corrosion
I. Повторите и запомните следующие слова: 1) application, n – применение, приведение в действие 2) environment, n – окружающая среда 3) coat, v – грунтовать, нанос

Protection of Steel from Corrosion
  Everybody knows how widely steel and iron products are used. But almost in all applications regardless of the environment, these products are coated by some means in order to preven

Induction Furnaces. Puddling Furnaces.
I. Повторите и запомните следующие слова: 1) core, n – сердечник, стержень 2) excess, n – избыток, излишек 3) insure, v – обеспечивать 4) quite, adv – впо

Induction Furnaces. Puddling Furnaces
Induction Furnaces. Induction furnaces are of two types – the coreless high-frequency type and the cored units which operate at low frequency. Principles of operation of both units are simil

Problems of Automation of Blast Furnace
I. Повторите и запомните следующие слова: 1) considerable, a – значительный, важный, большой 2) associated, а – связанный, объединенный 3) denote, v – означать

Problems of Automation of Blast Furnace
In the course of the past few years, a considerable amount of time and money has been spent studying the blast furnace process, and discussing with the operators some of the problems associated wit

Hot Working and Hot Working Processes
I. Повторите и запомните следующие слова: 1) bar, n пруток, – брусок 2) draw, v – тянуть, волочить (проволоку) 3) hammer, n,v – молот, ковать 4) prevent, n – пре

Hot Working and Hot Working Processes
  Hot working entails plastic deformation of metals at temperatures where strain hardening does not occur. Hot working is done for two reasons: to shape metal into useful objects; and

Cold Working and Cold Working Processes
  Cold working drastically changes the mechanical properties of metals, the most important being increase in strength and hardness with a simultaneous reduction of ductility. The meta

Oxy-fuel combustion for reheat furnaces
Steel Times International APRIL 2002   The use of oxy-fuel burners in reheat furnaces greatly reduces the volume of flue gas produced which in turn leads to lower h

Benefits of oxy-fuel combustion.
The main benefits of oxy-fuel can be summarized as: Higher furnace productivity. As a result of the improved thermal efficiency of the furnace and the improved heat transfer charact

The European Steel Industry and Climate Change Legislation
  While Europe chastises the USA for not signing up to the Kyoto Protocol to limit CO2 emissions, the US argues that – taking carbon sinks into the equation – Europe is a b

Energy efficiency.
The steel industry's generation of carbon dioxide (CO2) is mainly associated with the chemical reaction of carbon and iron ore in blast furnaces producing molten iron, which is then conv

Energy taxation.
The European Commission proposed in March 1997 a Directive for restructuring the Community framework for the taxation of energy products – COM(97) 30 – and various alternatives have been discussed

Emission trading.
On 23 October 2001 the European Commission adopted a proposal for a Directive of the European Parliament and of the Council establishing a framework for greenhouse gas emission trading within the E

Mill roll lubrication to cut costs
  A 15% reduction in mill power consumption, a 10% increase in work roll life and a 20% reduction of mill load are the result of employing hot mill roll lubricants. The correct sel

Cold rolling.
Different parameters are required for the cold rolling mill, where the selection of a robust product will pay for itself in terms of maximizing speeds and strip quality, increasing roll life and ex

Uzbekistan woos foreign investors
  Uzbek iron and steel works Joint Stock Manufacturing Amalgamation (Uzmetcombinat) was established in 1994 through a merger of the Uzbek metallurgy plant, the Shirin machine building

СПИСОК СОКРАЩЕНИЙ
1. General Electric Co. – Company 2. Ltd (Britain) - limited responsibility – корпорация из нескольких владельцев и вице президентов 3. OD. – outside diameter 4. ID. – ins

Хотите получать на электронную почту самые свежие новости?
Education Insider Sample
Подпишитесь на Нашу рассылку
Наша политика приватности обеспечивает 100% безопасность и анонимность Ваших E-Mail
Реклама
Соответствующий теме материал
  • Похожее
  • Популярное
  • Облако тегов
  • Здесь
  • Временно
  • Пусто
Теги