Реферат Курсовая Конспект
Operation - раздел Информатика, MARKER BEACON SYSTEM When You Push The Test Switch, The Receiver Does A Check Of The Internal Rece...
|
When you push the test switch, the receiver does a check of the internal receiver operation and the interface with the NAV control panel. The test takes 48 seconds. This is the test sequence that shows on the LED status indicators during the test:
· 0 to 2 seconds - the LRU status and the control fail LEDs are red
· 2 to 4 seconds - the LRU status LED is green and the control fail LED is red
· 4 to 12 seconds - the LRU status and the control fail LEDs go off
· 12 to 42 seconds - test status shows.
The LRU status LED indicator shows green for an LRU test pass condition or red for an LRU test fail condition. The control fail LED shows red if there is no tune input from the NAV control panel or if the signal is invalid.
– Конец работы –
Эта тема принадлежит разделу:
General... The marker beacon system supplies visual and aural indications when the... GENERAL DESCRIPTION...
Если Вам нужно дополнительный материал на эту тему, или Вы не нашли то, что искали, рекомендуем воспользоваться поиском по нашей базе работ: Operation
Если этот материал оказался полезным ля Вас, Вы можете сохранить его на свою страничку в социальных сетях:
Твитнуть |
Новости и инфо для студентов