Bessemer Converter - раздел Иностранные языки, АНГЛИЙСКИЙ ЯЗЫК
Molten Pig Iron, Gaseous Oxygen And Steel Scrap Are The Main ...
Molten pig iron, gaseous oxygen and steel scrap are the main constituents for making steel in the converter. Pig iron contains carbon, manganese, phosphorus, sulphur and silicon in addition to iron. Steel contains similar constituents, but in different proportions. Steelmaking, therefore, consists in eliminating or adding certain constituents which control the properties of the ultimate product. All the elements discussed, including iron have a strong affinity for oxygen, which in the converter process may be obtained from air, oxygen-enriched air, pure oxygen, steam-oxygen mixtures, or additions of iron oxide. The reaction of all these elements with oxygen results in the production of heat.
The essential principle of the converter process consists in blowing air through a body of molten metal or introducing oxygen onto the surface of the molten metal, thus rapidly oxidizing the various elements which enter the slag, or in the case of carbon, leave the converter as a gas. The heat generated is sufficient to maintain the metal in a liquid state and melt, some scrap.
Molten blast furnace iron (scrap iron) of the proper composition is poured into the Bessemer converter, a pear-shaped steel vessel mounted on trunnions. The converter is tilted to receive the metal. The capacity varies from 5 to 100 tons. The lining of the converter is of acid refractory material. When the vessel is charged, air is admitted from the blowing engines to a blast box at the bottom of the converter. From this box the air passes through numerous holes or tuyeres, to the interior of the converter. After the blast is turned on, the vessel is slowly turned upright. The air blows through the charge and oxidizes the silicon, manganese, and carbon, in the order given. The combustion of these materials furnishes the heat to carry on the process. The progress of the operation is shown by the flame issuing from the mouth of the converter. At first this flame is short and dry with very little visibility; then a reddish-brown flame of low luminosity occurs during the period when silicon and manganese are oxidized. As the carbon burns, the flame changes in character and increases in size, becoming yellowish-white. When the flame drops at the end of blow, the vessel is again turned down on its side and the blast is shut off. The photocell is now being used in some plants to control the blow, to determine when to turn down the vessel, and also to aid in better control of temperature. This whole operation of "blow" usually takes from 12 to 18 min.
The material now known as "blown metal" contains traces of silicon and manganese and 0.06% of carbon or less. Substantially all the phosphorus and sulphur of the original pig iron are present in the blown metal, which also contains about 0.2% FeO (iron oxide). This last constituent makes the metal "red short", incapable of being successfully forged or rolled; consequently deoxidizing agent is added to the blown metal. In making soft or low-carbon steel, ferromanganese is usually added to the blown metal while it is being poured from the converter into the ladle. Then the ladle is carried over the ingot moulds and the ingots are poured.
Дополнительные слова и словосочетания:
1) pear-shaped – грушевидный
2) acid refractory material – кислый огнеупорный материал
3) a blast box – воздуходувная коробка
4) the mouth of the converter – горловина конвертора
5) "blown metal" – продутый металл
6) "red short" – красноломкий
VIII. Прочтите текст и дайте краткое содержание текста в 4-x предложениях.
IX. Определите, соответствуют ли содержанию текста данные утверждения.
1. Производительность варьируется от 5 до 100 тонн.
2. Металл деформируется и разрушается из-за усталости и ползучести.
3. Воздух вдувается через загрузку и по очереди окисляет кремний, марганец и углерод.
4. Перекристаллизация – рост новых, свободных от деформации зерен.
5. Материал, известный как «продутый металл» содержит незначительное количество кремния, марганца и около 0.06 % углерода или менее.
X. Вставьте нужные по смыслу слова, в соответствии с содержанием текста.
1. The reaction of … results in the production of heat.
a) the flaw of gases;
b) all these elements with oxygen;
c) clay brick.
2. The … is of acid refractory material.
a) the bottom of open-hearth furnace;
b) the hearth with openings;
c) lining of the converter.
3. The converter is tilted to … the metal.
a) charge;
b) receive;
c) deoxidize.
4. Steel contains …, but in different proportions.
a) finished product;
b) slag inclusions;
c) similar constituents.
5. This whole operation of … usually takes from 12 to 18 min.
a) segregation;
b) "blow";
c) elimination.
XI. Установите, какие из приведенных утверждений, соответствуют содержанию текста.
1. The ability of cast steel continuously offers several advantages.
2. The photocell is now being used in some plants to control the blow.
3. Consequently, intermediate reheating furnaces or soaking pits would no longer be needed.
4. Steelmaking, therefore, consists in eliminating or adding certain constituents which control the properties of the ultimate product.
5. The first blast furnaces were probably very similar to those that can be seen in some parts of India and Africa today.
XII. Выберите из текста предложения, в которых характеризуется Бессемеровский конвертер.
XIII. Переведите данный отрывок без словаря:
In the basic Bessemer or Thomas process iron containing as much as 2 per cent phosphorus can be used. Since the converter is lined with dolomite, lime additions can be made. The oxygen contained in the air blown through the metal combines with the phosphorus, and this product reacts with the lime to form a stable compound that can be removed with the slag. This technique serves two purposes: it removes the phosphorus from the iron; and it enables a slag to be produced that can be used as a fertilizer.
Дополнительный текст
I. Прочтите данный отрывок, подготовьте рассказ 10-ти предложений о Генри Бессемере.
Henry Bessemer, English inventor and engineer, was born at Charlton on January 19, 1813. He discovered the first process for making inexpensive and plentiful steel. The so-called Bessemer process of steelmaking was a great event in the world's economic history. Previously steel had been scarce and expensive, made chiefly by the crucible process. Bessemer's engineering education was self-acquired.
In 1830 he came to London. There he worked out a process for the manufacture of "gold" powder.
At the time of the Crimean War Bessemer designed a rotating artillery shell. Finding the cast-iron cannon of the day too weak for it he set out to discover a stronger material. He discovered a process in which air was blown through pig iron. Sufficient heat was generated by the reactions to keep the charge hot and liquid. Many difficulties were encountered, principally because of phosphorus in the pig iron which was used as the raw material. Bessemer did not understand that in a converter lined with acid refractories, harmful phosphorus was not removed. He, however, developed his own source of non-phosphoric pig iron and brought it to commercial success.
In 1859 he established steel works at Sheffield producing guns and steel rails.
The application of this process to pig iron high in phosphorus was developed by Sidney Thomas (1878), who discovered the proper basic refractories. His method, the basic Bessemer or Thomas process, is of great importance in Europe.
The Bessemer process, both acid and basic, produced enormous quantities of steel used in bridges, railway construction and shipbuilding.
In his later years Bessemer, while still interested in steel, devoted his energies to other matters: a solar furnace, a large telescope etc.
Bessemer was one of the founders, and president of Iron and Steel Institute. He was made a fellow of the Royal Society and received many other honours. He died at Denmark Hill, London, on March 15, 1898.
XIV. Используя рис.1 (см. приложение), опишите Бессемеровский конвертер.
Федеральное агентство по образованию... Южно Уральский государственный университет... Кафедра английского языка...
Если Вам нужно дополнительный материал на эту тему, или Вы не нашли то, что искали, рекомендуем воспользоваться поиском по нашей базе работ:
Bessemer Converter
Что будем делать с полученным материалом:
Если этот материал оказался полезным ля Вас, Вы можете сохранить его на свою страничку в социальных сетях:
My Speciality
I. Повторите и запомните следующие слова:
1) choose (chose,
chosen), v
– выбирать
2) daily, adj
My Speciality
There are many faculties in the South Urals State University. But those students who have chosen the career in metallurgy study at the Metallurgical department. I’m a student of the Metallurgical D
Ferrous and Non-Ferrous Metals. Alloys
I. Повторите, запомните следующие слова:
1) appearance, n – внешний вид
2) compose, v – составлять
3) dense, a – плотный
4) feature, n – особенно
Ferrous and Non-Ferrous Metals. Alloys
It is known that metals are very important in our life. Metals have the greatest importance for industry. About two thirds of all elements found in the earth are metals. It is diffi
Iron and Iron Ores
I. Повторите и запомните следующие слова:
1) associate, v – соединять(ся)
2) as well as – также, а также
3) cheap, a – дешевый
4) cost, n – стоимость
5)
Iron and Iron Ores
Iron is the only metal that can be found in almost every part of the world. It’s the fourth element in abundance on the earth, being exceeded by oxygen, silicon and aluminum. It is the cheapest of
Grey Cast Iron
I. Повторите и запомните следующие слова:
1) distribution, n – распределение, распространение
2) flake, n – чешуйка, хлопья (мн.ч.)
3) include, v – включать
4) s
Grey Cast Iron
Grey cast iron is one of the most valued of cast metals. It may be made by melting pig iron and scrap in the cheapest of melting processes, the cupola, and then cast into sand molds
Casting
I. Повторите и запомните следующие слова:
1) accurate, a – точный
2) allow, v – позволять, разрешать
3) cavity, n – полость, пустота
4) hot, a – горячий
Casting
Casting is the oldest method of forming metals. Basically it consists of melting and pouring liquid metal into a cavity of the desired size and shape and allowing the metal to solidify. There are n
Metals and Non–Metals
I. Повторите и запомните следующие слова и словосочетания:
1) alloying element – легирующий элемент
2) alkali metal – щелочной металл
3) base metal – основной металл
Metals and Non–Metals
Among the more obvious distinctions between different kinds of elements is that which divides metals and nonmetals. Metals are distinguished from nonmetals by their high conductivity for heat and e
Corrosion
I. Повторите и запомните следующие слова:
1) damp air – влажный воздух
2) deposit, n – осадок, осаждать
3) destruction, n – разрушение
4) dilute,
Corrosion
It has long been known that metals can undergo changes in which they lose their characteristic properties; in most cases, the metal ceases to be an element, and becomes a compound. Iron exposed to
The Iron Blast Furnace
I. Повторите и запомните следующие слова:
1) carry up, v – поднимать
2) consume, v – потреблять
3) drop, v – опускать
4) float, v – плавать
5) flow, n –
The Iron Blast Furnace
Pig iron is one of the most important materials produced in the metallurgical industry. It is generally produced from the iron ore by chemical reduction process of iron conducted in
Bessemer Converter
I. Повторите, запомните следующие слова:
1) affinity, n – сродство, родственность
2) capacity, n – емкость, мощность, производительность
3) interior, n – внутренность, вн
Open-Hearth Furnace
I. Повторите и запомните следующие слова:
1) damper, n – заглушка
2) capacity, n, v – емкость, производительность
3) checkerwork, n – насадка
4) combustion, n –
Open-Hearth Furnace
The phenomenal success of the Bessemer process attracted many other inventors to the study of new and improved methods of steelmaking. The only process which was destined to become a rival of the B
Electric Furnace
I. Повторите и запомните следующие слова:
1) accomplish, v – совершать, выполнять
2) advantage, n – преимущество, польза
3) arc, n – дуга
4) conductor, n – прово
Electric Furnace
Numerous types of furnaces utilizing electric current as the source of heat have been developed by a large number of investigators, but relatively few types have survived as practic
Continuous Casting of Steel
I. Повторите и запомните следующие слова:
1) apply, v – применять, прикладывать
2) completely, adv – совершенно, полностью
3) conventional, adj – общепринятый, стандартны
Continuous Casting of Steel
Continuous casting as at present applied to the production of steel may be defined as a process in which liquid metal is poured into an open-ended mould, from the lower end of which a partially sol
Types of Mills
I. Повторите и запомните следующие слова:
1) accessories, n – принадлежности, арматура
2) billet, n – заготовка, сутунка
3) blooms, n – блюм, стальная болванка
4
Types of Mills
The three principal types of rolling mills used for the rolling of steel are referred to as "two-high", "three-high", and "four-high mills". As the names indicate, the
The Physics and Chemistry of Metallurgy
I. Повторите и запомните следующие слова:
1) fundamentals, n – основы
2) matter, n – материя, вещество,
3) correlation, n – соотношение
4. to reveal, v –
The physics and chemistry of metallurgy
Metallurgy is a science dealing with the constitution, structure and properties of metals and alloys, and the processes by which they are obtained from ores and adapted for the use
Relation of Metallurgy to Physics and Chemistry
I. Повторите и запомните следующие слова:
1) involve, v – включать в себя, подразумевать
2) outwardly, adv – внешне, снаружи
3) earthy, a – земляной, зерн
Relation of Metallurgy to Physics and Chemistry
In principle, steelmaking involves only a relatively, outwardly simple steps. Principal iron ores consist of combinations of iron with oxygen (iron oxides), mixed with varying percentages of useles
Protection of Steel from Corrosion
I. Повторите и запомните следующие слова:
1) application, n – применение, приведение в действие 2) environment, n – окружающая среда
3) coat, v – грунтовать, нанос
Protection of Steel from Corrosion
Everybody knows how widely steel and iron products are used. But almost in all applications regardless of the environment, these products are coated by some means in order to preven
Induction Furnaces. Puddling Furnaces.
I. Повторите и запомните следующие слова:
1) core, n – сердечник, стержень
2) excess, n – избыток, излишек
3) insure, v – обеспечивать
4) quite, adv – впо
Induction Furnaces. Puddling Furnaces
Induction Furnaces. Induction furnaces are of two types – the coreless high-frequency type and the cored units which operate at low frequency. Principles of operation of both units are simil
Problems of Automation of Blast Furnace
I. Повторите и запомните следующие слова:
1) considerable, a – значительный, важный, большой
2) associated, а – связанный, объединенный
3) denote, v – означать
Problems of Automation of Blast Furnace
In the course of the past few years, a considerable amount of time and money has been spent studying the blast furnace process, and discussing with the operators some of the problems associated wit
Hot Working and Hot Working Processes
I. Повторите и запомните следующие слова:
1) bar, n пруток, – брусок
2) draw, v – тянуть, волочить (проволоку)
3) hammer, n,v – молот, ковать
4) prevent, n – пре
Hot Working and Hot Working Processes
Hot working entails plastic deformation of metals at temperatures where strain hardening does not occur. Hot working is done for two reasons: to shape metal into useful objects; and
Cold Working and Cold Working Processes
Cold working drastically changes the mechanical properties of metals, the most important being increase in strength and hardness with a simultaneous reduction of ductility. The meta
Oxy-fuel combustion for reheat furnaces
Steel Times International APRIL 2002
The use of oxy-fuel burners in reheat furnaces greatly reduces the volume of flue gas produced which in turn leads to lower h
Heat transfer.
The total heat transfer occurring within a furnace can be broken down into four main areas:
– radiant heat transfer from the flame to the product;
– radiant heat transfer from the
Benefits of oxy-fuel combustion.
The main benefits of oxy-fuel can be summarized as:
Higher furnace productivity. As a result of the improved thermal efficiency of the furnace and the improved heat transfer charact
Energy efficiency.
The steel industry's generation of carbon dioxide (CO2) is mainly associated with the chemical reaction of carbon and iron ore in blast furnaces producing molten iron, which is then conv
Energy taxation.
The European Commission proposed in March 1997 a Directive for restructuring the Community framework for the taxation of energy products – COM(97) 30 – and various alternatives have been discussed
Emission trading.
On 23 October 2001 the European Commission adopted a proposal for a Directive of the European Parliament and of the Council establishing a framework for greenhouse gas emission trading within the E
Mill roll lubrication to cut costs
A 15% reduction in mill power consumption, a 10% increase in work roll life and a 20% reduction of mill load are the result of employing hot mill roll lubricants. The correct sel
Cold rolling.
Different parameters are required for the cold rolling mill, where the selection of a robust product will pay for itself in terms of maximizing speeds and strip quality, increasing roll life and ex
Uzbekistan woos foreign investors
Uzbek iron and steel works Joint Stock Manufacturing Amalgamation (Uzmetcombinat) was established in 1994 through a merger of the Uzbek metallurgy plant, the Shirin machine building
СПИСОК СОКРАЩЕНИЙ
1. General Electric Co. – Company
2. Ltd (Britain) - limited responsibility – корпорация из нескольких
владельцев и вице президентов 3. OD. – outside diameter 4. ID. – ins
Хотите получать на электронную почту самые свежие новости?
Подпишитесь на Нашу рассылку
Наша политика приватности обеспечивает 100% безопасность и анонимность Ваших E-Mail
Новости и инфо для студентов